Types of Plumbing Traps and Their Uses
A Plumbing Trap may be a simple device of shape bending pipe that permits the passing of waste. It also retains fluid for the prevention of the sewer gases from entering the building. Mostly, U, J, Q, or S-shaped pipes are located just beneath or within a fixture in domestic applications. as compared, a P-shaped plumbing trap is most ordinarily preferred. There are various Plumbing Trap Types available within the market.
Various Plumbing Trap Types are Listed Below:
1. Gully Trap
2. P Trap
3. S Trap
4. Q Trap
5. Floor Trap / Nahni Trap
6. Bottle Trap
7. Intercepting Trap
8. Running Trap
9. Drum Trap
10. Straight-Through Trap
11. Low-Level Bath Trap
12. Building Trap
13. Bell Trap
14. Grease Trap
1. Gully Trap:
These plumbing trap types are built external to the building to hold wastewater release from sinks, washbasin, restroom, and so on, and are related to the foremost nearby building drain or sewer in order that foul gases from the sewer don’t attend the house. These are profound seal traps. The profundity of the water seal need to be 50 mm a minimum of . It additionally keeps cockroaches and different bugs from sewer lines to squander pipes carrying wastewater. Gully traps are available within the following three shapes:
2. P Trap:
This trap is employed with the Indian closet (ORISSA Pattern). The traps are produced using forged iron or UPV sheet. This trap likewise features a water seal and stops the section of foul gases to the house.
3. Q Trap:
These plumbing trap types are utilized within the latrine submerged storeroom. it’s practically like an S trap and is getting used within the upper story aside from the bottom floor.
4. S Trap:
This plumbing trap types are sort of a P-shaped trap and is employed for fixing water closets in latrines. The lone contrast between the P trap and therefore the S trap is that the P-shaped trap is getting used for an outlet through the wall while the S-shaped trap is employed for an outlet through the ground .
5. Floor Trap/Nahni Trap:
The floor plumbing trap types are additionally called as Nahni Trap (Nahni in hindi methods washing/washing place). Nahni plumbing Trap is given to forestall the foul gasses going into the building by providing the water seal. a minimum of 50 mm profundity of water seal need to tend . If squander water is streaming, floor trap forestalls the foul gases (awful stenches) to enter the building.
Also Read: 16 Types of Plumbing Fitting and Their uses with Image
