# Difference Between One Way Slab and Two Way Slab | What Is Slab | What Is a One Way Slab | What Is a Two Way Slab

**What Is Slab?**

**The slab is an important structural element that is constructed to create horizontal or flat surfaces such as roofs, floors, decks, and ceilings.** A** slab** has generally some thickness and it is supported by other structural elements like **RCC columns**, **RCC beams****, walls**, or the ground surface.

**One Way and Two Way Slabs**

**The slab** is made up of **cement concrete** with top and bottom surfaces are parallel or near so. The depth of a **concrete slab **is very small compared to its span or length.

There are two major types of slabs used in building construction one-way slabs and two-way slabs. In this article, we will discuss what is the** Difference Between One Way Slab and Two Way Slab**

**What Is a One-Way Slab?**

**According to IS 456:2000,** the slab is called one way slab when the ratio of** longer span(L)** to **shorter span(B) **which is **(L/B) greater than 2.** In general practices, a **One-way slab** is supported by two pa**rallel walls or beam.**

**One Way Slab**

The flat surface of a mainly **uniformly loaded slab** deforms in a cylindrical surface in which the **curvature **therefore the bending moment develops in only one direction, such a **slab **is known as the **one-way slab.**

**One way slab **essentially acts as a **shallow beam** with a large width. The slabs supported all four sides also behave as one-way slabs if the longer** span ratio (ly)** to the shorter span **(lx)** is greater than two.

**Verandah **is the best example to recognize the **one-way slab,** where the slab is **traversing **in the shorter direction with main **reinforcement** and the distribution of reinforcement placed in the opposite direction.

**Read More: ****How to Calculate Steel Quantity For Slab Excel Sheet**

**What Is Two Way Slab?**

**Two-way slabs** are slabs that are supported on all four sides. In this slab, the load will be transferred in **both directions**, thus **main reinforcement** is provided in **both directions for slabs. **In the** two-way slab,** the ratio of **longer span to shorter spans less than two,** which carries the load by flexing in two perpendicular directions.

**Two Way Slab**

In the case of the **two-way slab**, both the longer span and shorter span deflects in **dish or saucer shape**.

In this kind of slab, **shear forces **and large moments are initiated in the **vicinity **of the column. Hence, the thicknesses of **slabs **are provided more nearby the **column**.

These** types of slabs **are mainly used on the floors of **multistoried buildings**.

**What Is Flat Slab?**

**A flat** **Slab** is an **economical **type of slab **supported through concrete columns** rather than the use of a beam.

Flat slabs have a wide range of uses. Various **Industrial Structures, Hotels, parking garages, Warehouses, ramps, and tall buildings** are the components where they can be used.

It serves the purpose of **permitting **a large amount of light obstructed by the** depth of beam**s, by increasing the** ****floor height**.

**What Is Grid Slab?**

**Grid Slabs** are supported on the **beams **with **columns **only on the edge of the hall.

In places such as l**arge halls, auditoriums, public places, marriage halls**, etc. **column-free** area is required on large scale, hence to serve this purpose large deep beams may be allowed but the periphery is the permitting element.

**Analysis of The Slab**

Slabs are **analyzed and designed** in the same manner as the beams. The reason is that the slabs are primarily **flexural members** as that beams. The analysis is carried out as follows:

**Elastic Analysis:**

**1 m width** strip of the slab is considered and analyzed. Loads acting on this **strip **are calculated. This strip is analyzed as a** dummy beam** 1 m in width.

**Code Coefficients:**

Being a s**emi-empirical method **its analysis based on the **Yield Line Theory.** The coefficients provided in the **code **can be trusted directly to analyze the slabs.

Care should be taken that the **redistribution of moments** is not permitted in this case.

**Yield Line Theory:**

**Yield line theory** is a limit state design or collapse** load method** or limit state design developed by **Johnson**.

**Read More: ****Load Calculation on Column, Beam & Slab**

**Significance and Function of Slab**

Depending upon the requirement and the design of the structure, the slab can be utilized for some** major functions and has significance as follows:**

- In the** reinforced concrete **(RCC) construction, the slab is a** **widely used **structural element **forming the floor and the **concrete slab** is the plane element having a **depth D **much smaller than its span or width L.

- Slab bears the loads acting on it and properly transfers the forces either in a **one-way **or **two-way mechanism**.

- A slab provides a flat surface or a **walking surface**.

- Slab gives **support **to the loads acting on the structure.

- The slab also constructs a **divider **between the consecutive floors thereby providing **privacy **to the occupants of the building.

**Mechanism of Load Transfer In Slab**

The **forces **transfer from slab to beam occur in** one way or two ways**. The whole **system **completely depends on the **geometrical dimensions **of the slab.

If slabs may be supported by **columns **only, in this case,** two-way action **will prevail.

If the ratio of **long side / short side > 2 **it is considered as one-way slab, and if longer side to shorter side ratio** < 2** then it is considered as a two-way slab.

The** load transfer mechanism **from slab floor to supporting elements for one-way slab and two-way slab is shown in the figure.

**Reinforcement Details In Slab**

**Reinforcement arrangement in a slab** is the main parameter to understand the system of forces and safely distribute the loads coming on the slab.

**One Way Slab Reinforcement Details**

Commonly a** One-Way Slab**, as one side is greater than the other one, the utmost load will be transmitted by the larger side. Accordingly, it is necessary to contribute sufficient support to the larger side.

**One Way Slab Reinforcement**

To provide sufficient support to the extended side, the main **reinforcement bars** are placed **parallel** to the shorter side and the distribution bars are placed on the longer side which does not support** transmitting the load**.

So, a one-way slab is chosen where main bars or **cranked bars** are provided on the **shorter side** of the slab due to bending. Distribution bars **(straight bars)** provided on the **longest side** as shown in the figure.

**Two Way Slab Reinforcement Details**

In the** 2 way slab**, as the loads are acting in both the direction i.e. longer and shorter direction.

**Two Way Slab Reinforcement**

In this type of slab, the **main reinforcement **bars are laid in both directions.** **The loads held up by two sides in this type of **slabs are equal.**

You can recognize the **main bars** are placed on both sides. The **RCC slab **is held up by beams on every four sides and the loads are upheld by **structural components** such as beams along with both directions.

Slab with **reinforcement steel** in both directions is more practicable and supportive than **one-way reinforcement** slabs.

**Types of Loads Acting on Slab**

There are different load that act on a slab,

- **The dead load of the slab**

- **Live load**

- **Floor finish load**

- **Snow load in the case of roof slab**

- **Earthquake loads**

**Difference Between One Way** **Slab and Two Way Slab**

**Sr. No.One-Way SlabTwo-Way Slab1.**The utmost load is transmitted by the larger side.The loadings are imposed and held up in both directions i.e. longer and shorter directions.**2.**Bending moment occurs only in one direction i.e. shorter direction.Bending moment occurs in both directions i.e. shorter and longer.**3.**One way slabs have less steel content.Two way slabs have more steel content as compared to one way slabs.**4.**The main reinforcement bars are placed parallel to the shorter side and the distribution bars are placed on the longer side which won’t support transmitting the loads.In this type of slab, the main reinforcement bars are placed in both directions i.e. shorter and longer.**5.**The slab is supported by other structural elements such as beams on the two different sides to bear the load and transmit it along one direction.A RCC slab is upheld by beams on all four sides and the loads are supported by the structural elements such as beams along with both directions.**6.**The ratio of the longer span (ly) to the shorter span (lx) must be equal to or greater than 2.The ratio of the longer span (ly) to the shorter span (lx) must be less than 2.**7.**It is economical near about 3.5 m.It is practicable for the panel sizes of approximately 6m x 6m.**8.**In designing one-way slabs, we placing less steel so the depth of the slabs increases, therefore the thickness of the one-way slabs is larger than that of two-way slabs.In designing a two way slab, we placed more steel so the thickness of the slabs is reduced, hence the thickness of the two way slabs is less than that of the one-way slab.**9.**The deflected structure is cylindrical.The shape of deflected structure is like a dish or saucer.**10.**Example: Cantilever slabs, Chhajas, and verandahs.These kinds of slabs are mainly utilized on the creative flooring of multi-story buildings.

## FAQs

What Is Slab?The slab is a common structural component of buildings, consisting of a flat, horizontal surface made of cast concrete. Slab bears the loads acting on it and properly transfers the forces either in a one-way or two-way mechanism.One Way Slab and Two Way Slab

In the **One Way Slab, **the utmost load is transmitted by the larger side. In the **Two Way Slab**The loadings are imposed and held up in both directions i.e. longer and shorter directions. The amount of steel Steel content required in one-way slab is less as compared to a two-way slab.One Way Slab**One Way Slabs** are supported on two different and opposite sides by the rigid supports, carrying the imposed load by flexing in a direction perpendicular to that of supports.

It essentially acts as a **shallow beam** with a large width hence, **Verandah **is the best example to recognize the one-way slab.One Way Slab Design**Designing **a one-way slab is a simple task and can be carried out easily. Arranging **reinforcement in one way slab** is the main parameter to understand and design as per the system of forces.**Two Way Slab DesignTwo Way Slabs **can be accurately Designed by **Direct Design Method** as per **ACI 318–11**. Deflection of Two-way** **slab is in two directions along with primary reinforcement placement. Here the **main reinforcement **bars are laid in both directions to tackle two-way deflection.One Way Vs Two Way SlabThe basic difference between One Way and Two Way Slab is that the **bending moment **occurs only in one direction i.e. the shorter direction in** One Way Slab** while in **Two Way Slab** bending moment occurs in both directions i.e. shorter and longer. The deflected structure is cylindrical in one way and the country shape of the deflected structure is like a dish or saucer in Two Way Slab.Slab Reinforcement**Reinforcement **is laid parallel to the shorter direction and the reinforcement parallel to the longer direction is distribution steel in one way slab. While talking about reinforcement in Two Way slab it is laid in both the direction. What’s a Two Way?Something which is** bi-directional** is known as **Two Way**. Working or allowing something to move in **two** opposite directions is said to be Two Ways. **For example**, The bridge is now accessible for two–way traffic.Difference Between One Way Slab and Two Way Slab**Difference Between One Way Slab and Two Way Slab:** **Bending moment **occurs only in one direction i.e. the shorter direction in** One Way Slab** while in **Two Way Slab** bending moment occurs in both directions i.e. shorter and longer. The deflected structure is cylindrical in one way and the country shape of the deflected structure is like a dish or saucer in Two Way Slab.

**You Might Also Like:**

- **How to Calculate Steel Quantity For Slab Excel Sheet**

- **Load Calculation on Column, Beam & Slab**

- **What Is Plinth | What Is a Plinth Beam | What is Height of Plinth | What is Plinth Protection | Purpose of Plinth Protection**

- **Raft Foundation | Mat Foundation| Types of Raft Foundation | Raft Foundation Construction Process**

**Image Courtesy:** Image1 Image2 Image3 Image4 Image5